Stripping - 軟板(FPC)剝膜

After etching, the etching resist still on the pattern.  Maker has to remove film residue and then pattern will expose.

剝膜：蝕刻完成的線路上仍然留有硬化乾膜，在此流程使用特定藥水沖洗基板，利用藥水特性清除覆著在線路上的乾膜，露出完整銅層線路。

[commericial adverrtising]

• Item:: Laminated Hole Press M/C (type 450)
• FPC width:: 200~270mm
• Tooling size:: 500(W)*500mm(L)
• Tooling upper and lower stroke is 25mm
• Robot arm control the length of pulling FPC.
• Efficient pulling distance is 450m/m, speed is 500mm/sec